JET FUEL JP54 is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines.
It is clear to straw colored. The most common fuels are Jet A and Jet A-1 which are produced to an internationally standardized set of specifications.
The only other jet fuel that is commonly used in civilian turbine engine-powered aviation is called Jet B and is used for its enhanced cold-weather performance
|
SPECIFICATION 54 JET FUEL |
||
|
COMPONENTS |
MAX. |
MIN. |
|
Density at 20, not less |
780 |
775 |
|
Fractional temperature |
150 |
150 |
|
Kinematic viscosity mm2/c (cCT) in +20C |
1.3 |
1.25 |
|
In -40 c, no more |
8 |
8 |
|
Lowest heat of combustion |
42120 |
42900 |
|
Height of not smoking flame |
25 |
25 |
|
Fuel Acidity |
0,7 |
0,7 |
|
Iodic number – grams of iodine on |
100 grams of fuel |
3.5 |
|
Flash temperture in close area, not below |
28 |
28 |
|
Crystallisation Temperature began, not above |
-50 |
-50 |
|
Oxidation stability in static conditions at 150 degrees, |
||
|
no mote: concentration of a deposit on 100 see |
||
|
fuel |
18 |
18 |
|
Mass fraction of aromatic hydrocarbons, no more |
22 |
22 |
|
Concentration of actual pitches, no more |
3 |
5 |
|
Mass fraction of the general (common) sulfur |
0,2 0, |
25 |
|
Mass fraction mercaptane sulfur |
0,003 |
0,005 |
|
Mass fraction of hydrogen sulphide |
Absence |
Absence |
|
Copper plate test at 100 degrees within 3 hours |
Maintains |
Maintains |
|
Maintenance of ashes |
0,003 |
0,003 |
|
Contents of water-soluble acids and alkalis |
Absence |
Absence |
|
Contents of washed naften acids |
Absence |
Absence |
|
Contents of mechanical impurity and waters |
Absence |
Absence |
|
Interaction with water, a point, no more: a condition of an interface |
1 | 1 |